Solly protective film
Solly protective film

Self-adhesive protective film "Solly" is used to protect sandwich panels, window sills, glass, mirrors, metal tiles, steel with a polymer coating. The protective film does not leave any marks on the protected surface after it is removed. Environmentally friendly.

AF.0.60

Neva polymer AF.0.60

  • The film is intended for use as a protective or covering material in construction, mechanical engineering, aircraft construction and other industries, for paint and varnish works. The film contains a fire retardant to impart flame retardant properties.
  • Specifications
  • Directions for use
Thickness, micron150, ± 10 %
Width, mm1000, ± 2%
Appearance and colorThe film has no cracks, folds, breaks
Tensile strength, MPa, not less: in the longitudinal direction14,7
Tensile strength, MPa, not less: in the transverse direction13,7
Welding temperature, С120 – 150
Weld seam strength, N / 15mm42
Frost resistance at -40CNo cracks
Water vapor permeability, mg / cm 2, no more0,4
Neva Polymer products prove their impressive quality day after day in challenging conditions and are regularly subjected to rigorous controls. All information and recommendations are provided to the best of our knowledge and based on our practical experience. However, Neva Polymer makes no warranties, either expressed or implied, including, but not limited to, the implied warranties of merchantability or suitability for specific purposes. Thus, it is the user's responsibility to determine if a Neva Polymer product is suitable for a particular purpose and practice. application by the user. Should you have any doubts, our technical support staff will be happy to advise you.

CCEPTANCE CRITERION

The purchaser is solely responsible for the results of the application of the film, therefore we recommend in each case to carry out their own tests in order to establish the suitability of the film for the intended application.

TRANSPORTATION AND STORAGE

The film is transported by any type of covered transport in accordance with the rules for the carriage of goods in force for a specific type of transport. Transportation conditions are in accordance with GOST 15150.

The film should be stored in closed, dry rooms.

Store in its original packaging at a temperature of 15-25 ° C and a relative humidity of 40-60%

Shelf life of film in rolls: 12 months from the date of manufacture.

Basic consumer properties or characteristics: shown on the front side of the passport.

After the expiration of the guaranteed storage period, the film is tested for compliance with the requirements of these technical conditions and, upon establishing compliance, can be used by the consumer for its intended purpose. In case of non-compliance, the film is disposed of.

Certification information:

Certificate of Conformity No. APB.RU.OC002 / 2.H.00844